Cars with External BT module or HighLine SWCM

Steering wheel control module 1K0 and 3C0
Locked
User avatar
Xhorse
Site Admin
Posts: 394
Joined: Fri Feb 24, 2017 4:12 pm
Contact:

Cars with External BT module or HighLine SWCM

Post by Xhorse »

Cars with external BT module such as 5P0862335 , 7E0035730 , 7L6035730 , 5N0035730 , 3C8035730 , 1Z0035729 and radio RCD330 (6RD035187, 6R0035187, or with SWCM what can not support LowLine coding

1st - need solder emulator

Require SWCM(16) - HighLine
Need install MFSW Emulator
Emulator support LIN 1.3 and LIN 2.0
1) check if your SWCM have proper PIN location
Image
If you have 5 or less , you need solder PINS from spare module (see picture below)
Image

2) Install EMULATOR and solder connection wires
Image
Image
Image
Image
3) Select proper LIN configuration on EMULATOR and recode SWCM module ( Some 1K0 modules support both LIN (1,3 &
2.0)
Image
Image

If you want operate CCS from MFSW install proper stalk
Image

2nd - Now need to solder MODULE
4) Solder output wires depend of module type
Image
Image

5) solder input wires and cut 2 tracks (this is 2nd airbag tracks, not in use) NO NEED solder BLACK wire, due to GND is already in Airbag loom, Black wire is need only if you want test MFSW separate
Image
Because we use 2nd airbag tracks , you can not use dual AirBag ,Blue resitor is ONLY for emulate 2nd airbag in Passat

ImageImage

6) After proper CAN installation and POWER connection RED led stay ON (go OFF after Ignition OFF). When you connect MFSW over LIN wire WHITE LED start flashing, when you press CCS button (CCS is ON) , Green LED start illuminate, when module is working RED led illuminate, when module go to “sleep” RED and other led's are OFF
Image

7) After proper connection you should see new module (3D) in Can Gateway list , please "register" it on Gateway Instalation list
Image
Image

9) Check and change if need Airbag loom
Image

2 samples of genuine MFSW loom after changes
Image
Image

10) If all communication and connections is ok, please do proper coding according to y our MFSW
viewtopic.php?f=41&t=240&sid=88a9a92d11 ... cbe5324bb0

Locked

Who is online

Users browsing this forum: No registered users and 0 guests