Cars with External BT module

1st generation SWCM
Locked
User avatar
Xhorse
Site Admin
Posts: 331
Joined: Fri Feb 24, 2017 4:12 pm
Contact:

Cars with External BT module

Post by Xhorse »

Cars with external BlueTooth module such as 5P0862335 , 7E0035730 , 7L6035730 , 5N0035730 , 3C8035730 , 1Z0035729 and radio RCD330 (6RD035187, 6R0035187)

Require SWCM(16) - HighLine + Need install MFSW Emulator

Find (BLACK) socket which keep connection between PCB and Slip Ring flexi and take it off from PCB
Image

Remove connector 2,3,4 from PCB, solder PIN 1 with connector for better connection
ImageImage

Mount MFSW Emulator with LIN 2.0 configuration , cut off cables for proper length and solder as picture below (the can not be solder to PIN, that is why we remove connector permanent)
Image
Image

Solder input MFSW Module wires (RED and Yellow) to SlipRing PIN's
Image

Solder main wires to T16 connector socket
Image

Modify back of cover ( cut off piece of plastic which keep WHITE socket (no longer need it)
Image

Check if Airbag loom have proper cables located (if you use genuine MQB Airbag loom , no need to do any changes, just confirm is right)
Image

Install module into the car, Login to module 16 -> coding and code SWCM, code MFSW ONLY
Image

MultiFunction Emulator should be available as subsystem (HORN EMU)
Image

DO NOT CODE Other options such as below:
Image

Locked

Who is online

Users browsing this forum: No registered users and 1 guest