Require SWCM(16) - HighLine + Need install MFSW Emulator
Take off back cover and locate Slip Ring socket, take it off
Disconnect PIN 1, 2 3 from connectors , solder PIN 4 with connector
Install MFSW Emulator with LIN 2.0 configuration in proper place, make sure that gear from G85 will not destroy cables
Cut off cables for proper length and solder as picture below
Solder main wires to T16 connector socket
Modify back of cover , cut off piece of plastic which keep WHITE socket (no longer need it)
Check if Airbag loom have proper cables located
2 samples of genuine MFSW loom after changes
Install proper stalks
THIS IS VERY IMPORTANT , YOU CAN NOT KEEP WIPER STALK with TRIP computer for example or code SWCM to Board computer via Wiper stalk , otherwise instrument cluster might freak out and cannot be operate from MFSW as should be, also CCS will not work
Install module into the car, Login to module 16 -> coding and code SWCM, code MFSW ONLY
DO NOT CODE Other options such as below:
Keep in mind to code other function require for your car
Function desctription can be different depend of SWCM SW/HW version or VCDS version
Go back to main screen and check if MFSW Emulator is correct recognize via SWCM
After proper connection , please read coding desctriprion and code module depend of your new MFSW
viewtopic.php?f=41&t=240&sid=88a9a92d11 ... cbe5324bb0