Require SWCM(16) - HighLine + Need install MFSW Emulator
Find (BLACK) socket which keep connection between PCB and Slip Ring flexi and take it off from PCB
Remove connector 2,3,4 from PCB, solder PIN 1 with connector for better connection
Mount MFSW Emulator with LIN 2.0 configuration , cut off cables for proper length and solder as picture below (the can not be solder to PIN, that is why we remove connector permanent)
Solder input MFSW Module wires (RED and Yellow) to SlipRing PIN's
Solder main wires to T16 connector socket
Modify back of cover ( cut off piece of plastic which keep WHITE socket (no longer need it)
Change wires in Airbag loom (samples below)
Install module into the car, Login to module 16 -> coding and code SWCM, code MFSW ONLY
MultiFunction Emulator should be available as subsystem (HORN EMU)
DO NOT CODE Other options such as below:
Keep in mind to code other function require for your car
Function desctription can be different depend of SWCM SW/HW version or VCDS version
After proper connection , please read coding desctriprion and code module depend of your new MFSW
viewtopic.php?f=41&t=240&sid=88a9a92d11 ... cbe5324bb0