Need only if upgrate kit can not do Frimware update / not recognize device
>>>DOWNLOAD <<<
Also, can be download and install directly from Upgrate Kit
1, Connect ONLY USB cable and turn on the Dolphin machine, it will show the BIOS on the screen as below,
2, Run the upgrade kit and choose ‘Find Device’, it will be show a small window , choose ‘Yes’ and will guide to install the driver
3, Choose the correct driver according to the machine as below, make sure you are shut down all protection before you install the driver, especially for windows 10 system
4, After the driver has been installed, run the ‘Upgrade kit’ and choose ‘Find Device’ again, to see if you can see the device serial number and firmware version, do not chose ‘Update’ until it you can see that , because if you can’t find device ,which means the driver is not been installed, and the machine will be blocked if you update it without driver
